HPE MSA 1050 SAN Storage

HPE MSA 1050 SAN Storage

Need a modern shared storage array which is flash-ready when you are and affordable with what’s left of a small budget? The HPE MSA 1050 SAN Storage brings affordable flash storage down to the most price sensitive customers. Designed to meet entry-level storage requirements, the MSA 1050 is a good fit for budget constrained customers. With the lowest entry price point in the Hewlett Packard Enterprise Storage portfolio and field-proven HPE ProLiant compatibility, the HPE MSA 1050 SAN Storage is the platform of choice for smaller IT workloads. The HPE MSA 1050 SAN Storage features iSCSI, FC and SAS host interface connectivity at previously unattainable entry price points. MSA allows users to take advantage of the latest storage technologies while also providing a balance between performance and budget. HPE MSA Storageportfolio has been the industry-leading entry storage FC platform1 for the past eight years, with nearly 500,000 storage systems sold worldwide.

What's new

• Introducing new and higher capacity small form factor (SFF) and large form factor (LFF) drives.

• HPE MSA 2.4TB 12G SAS 10K SFF (2.5in) Enterprise 512e with a 3yr warranty hard drive; and HPE MSA12TB 12G SAS 7.2K LFF (3.5in) Midline 512e with a 1yr warranty hard drive.

Features

Affordable, Flash-ready Storage

The HPE MSA 1050 SAN Storage base unit comes factory-configured with dual-controller arrays, four host ports delivering 8 Gb Fibre Channel, 1GbE iSCSI, 10GbE iSCSI or 12 Gb SAS.

Moving to a modern flash-ready array delivers performance enhancement and decreased latencies. Advanced data services and a small investment in flash can take your organization to the next level.

Simple, Proven HPE ProLiant Gen10 Compatible Shared Storage

The HPE MSA 1050 SAN Storage continues its heritage of providing affordable, easy to use shared storagewithout a big learning curve with its intuitive setup and management for HPE ProLiant administrators.

Matching industrial design to fit right in with your HPE ProLiant Gen10 Servers.

Advanced Virtualization Services with a Simplified Licensing Approach

The HPE MSA 1050 SAN Storage leverages flash with easy to use, easy to maintain tiering and read cache technologies.

No storage expertise necessary; this system dynamically responds to workload changes so you don’t have to.

Expandable and Upgradable to Meet New Demands

With the HPE MSA 1050 SAN Storage you can add additional hard disk drives (HDDs) or disk expansions to your HPE MSA 1050 SAN Storage or upgrade to the HPE MSA 2050 SAN Storage through data-in-place upgrades; a simple 15 minute upgrade.

HPE MSA 1040 SAN Storage

Entry consolidation and virtualization initiatives are now well in your budgetary reach. The HPE MSA 1040SAN Storage offers many of the HPE MSA 2040 features but at a substantially lower entry price point. HPEProLiant and BladeSystems administrators as well as IT generalists will find storagemanagement tasks simple and intuitive with MSA. The MSA 1040 arrays leverage a new 4th-generation controller architecture with a new processor, 2-host ports and 4 GB cache per controller. Take advantage of the latest hard drives advances by choosing the form factor and technology which best meet your application and budget requirements. Unlike many competing arrays, the MSA 1040 ships standard with intuitive management tools and powerful data services such as Snapshots and Volume Copy for increased data protection.

What's new

• Introducing new and higher capacity small form factor (SFF) and large form factor (LFF) drives.

• HPE MSA 2.4TB 12G SAS 10K SFF (2.5in) Enterprise 512e 3yr warranty hard drive; HPE MSA 12TB 12G SAS 7.2K LFF (3.5in) Midline 512e 1yr warranty hard drive.

Features

Simple: Flexible Architecture. Easy to Setup. Easy to Manage.

The integrated setup and management Web-based Interface (WBI) makes MSA easy to manage for HPEProLiant/BladeSystems administrators and IT generalists.

Leverage the latest Large or Small Form Factor hard disk drives –choice of High-performance Enterprise-class SAS or high-capacity SAS Midline drives based on application, performance and budget requirements.

On-board management tools augment OS and hypervisor views navigate firmware upgrades, monitor array performance with ease locally or remotely.

Affordable: Popular iSCSI/SAS/Fibre Channel Configurations

Dual controller configurations are standard and available at single controller price points.

More capacity/performance within your budget.

Latest MSA technology at lower cost.

Fast: The MSA 1040 Delivers up to 50% More Performance Compared to P2000 G3

The HPE MSA 1040 SAN Storage leverages the 4th generation MSA architecture, 2-port controllers with 4 GB Cache each, faster processor and a performance optimized I/O engine.

Increased performance translates into better application response times and facilitates entry consolidation and virtualization initiatives.

Futureproof: Built-in Expandability Along with an HPE MSA 2040 Upgrade Option

Add Disk Enclosures as needed to boost capacity and spindle count. Most low-cost entry arrays don’t allow expansion.

Data-in-Place upgrades eliminate time-consuming and risky data migrations.

HPE MSA 1040 SAN Storage allow simple controller swap to flagship HPE MSA 2040. Other value-priced arrays force you to compromise

HPE MSA 2052 SAN Storage

Looking for seriously simple and affordable flash storage? The HPE MSA 2052 SAN Storage is a hybrid flash system designed for affordable application acceleration for small and remote office deployments. Don’t let the low cost fool you it gives you the combination of simplicity, flexibility and advanced features you many not expect in an entry-priced array. Start with 1.6 TB of flash capacity included and scale as needed with any combination of solid state disks (SSD), high-performance enterprise, or lower-cost midline SAS-baseddrives. The HPE MSA 2052 SAN Storage has been the industry-leading entry storage Fibre Channel (FC) platform for the past eight years, with nearly 500,000 systems sold worldwide1. Delivering performance in excess of 200,000 IOPS, it can save you up to 40%[2] with an all-inclusive software suite and 1.6 TB of flash capacity included. It’s seriously simple and affordable flash storage to help you get high performance for a low cost.

What's new

• Introducing new and higher capacity small form factor (SFF) and large form factor (LFF) drives.

• HPE MSA 2.4TB 12G SAS 10K SFF (2.5in) Enterprise 512e 3yr warranty hard drive; HPE MSA 12TB 12G SAS 7.2K LFF (3.5in) Midline 512e 1yr warranty hard drive.

Features

Affordable Application Acceleration

The HPE MSA 2052 SAN Storage performs in excess of 200,000 IOPS delivering outstanding application acceleration for small to medium-sized businesses either locally or remotely.

Delivers 2x more performance than the previous HPE MSA 2042 SAN Storage generation2.

Save 40% on HPE MSA 2052 with all-inclusive software and 1.6 TB of Solid State Drive (SSD) capacity included.

Advanced Data Services With No Experience Required

The HPE MSA 2052 SAN Storage is easy to install, easy to use, easy to maintain, no storage previous expertise required.

Automated tiering dynamically responds to workload changes, so you don’t have to.

Keep Your Business Running with Expanded Data Protection Features

The HPE MSA 2052 SAN Storage provides updated virtualized snapshot technology making data protection and instant recovery a snap.

Remote replication with Fibre Channel (FC) and iSCSI supports an affordable disaster recovery solution.

Grow Flexibly Now and Into the Future

The HPE MSA 2052 SAN Storage delivers data-in-place upgrades protecting drive investments and reduces data migrations.

Start small and scale as needed with any combination of Solid State Drives (SSDs), enterprise or midline SAS disk drives.

HPE ProLiant ML110 Gen10 Server

Technical Specifications

Processor family

• Intel® Xeon® Scalable 5100 series Intel® Xeon® Scalable 4100 series Intel® Xeon® Scalable 3100 series

Processor number

• 1

Processor core available

• 4 or 6 or 8 or 14

Processor cache

• 8.25 MB L3 11.00 MB L3 16.50 MB L3 19.25 MB L3

Processor speed

• 3.6 GHz maximum

Form factor

4.5U Tower

Power supply type

• One HPE ML110 Gen10 350W ATX FIO Power Supply Kit or One HPE ML110 Gen10 550W ATX Power SupplyKit or One HPE 800W Flex Slot Platinum hot plug power supply kit

Expansion slots

• 5 PCIe 3.0, for detailed descriptions reference the QuickSpecs

Maximum memory

• 192 GB

Memory slots

• 6 DIMM slots

Memory type

• HPE DDR4 SmartMemory or HPE DDR4 Standard Memory

Drive type

• 8 LFF SAS/SATA/SSD or 16 SFF SAS/SATA/SSD depending on model

System fan features

• 2 non-hot plug, non-redundant

Network controller

• HPE Ethernet 1Gb 2-port 332i Adapter

Storage controller

• HPE Smart Array S100i SR Gen10 SW RAID

Minimum dimensions (W x D x H)

44 x 19.5 x 48.05 cm

Weight

Minimum: 13.5 kg Maximum: 25.0 kg

Infrastructure management

• Included: HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires download) Optional: HPE iLO Advanced, HPE iLO Advanced Premium Security Edition

Warranty

• 3/3/3 - Server Warranty includes three years of parts, three year of labor, three year of onsite support coverage. Additional information regarding worldwide limited warranty and technical support is available at: http://h20564.www2.hpe.com/hpsc/wc/public/home. Additional HPE support and service coverage for your product can be purchased locally. For information on availability of service upgrades and the cost for these service upgrades, refer to the HPE website at http://www.hpe.com/support

HPE ProLiant ML30 Gen9 Server

Technical Specifications

Processor family

• Intel® Xeon® E3-1200 v5 product family Intel® Xeon® E3-1200 v6 product family Intel® Core™ i3
• Intel® Pentium®

Processor core available

• 2 or 4

Processor cache

• 8 MB L3 3 MB L3

Processor speed

• 4.0 GHz

Form factor

4U

Power supply type

• (1) Multi-output

Expansion slots

• 4 maximum, for detailed descriptions reference the QuickSpecs

Maximum memory

• 64 GB

Memory slots

• 4 DIMM slots, maximum

Memory type

• DDR4 UDIMM

Memory protection features

• Unbuffered ECC

Drive description

• (4) LFF SAS/SATA/SSD or
• (8) SFF SAS/SATA/SSD
• Hot plug and/or Non-hot plug, depending on model

Drive type

• 4 LFF SAS/SATA/SSD or 8 SFF SAS/SATA/SSD

Network controller

• 1 Gb 332i Ethernet Adapter, two ports per controller, applicable to all models

Storage controller

• HPE Dynamic Smart Array B140i or HPE Smart Array P440, depending on model

Infrastructure management

• HPE iLO Management Engine, HPE Insight Control

Warranty

• 3/1/1 Server Warranty includes three years of parts, one year of labor, one year of onsite support coverage. Additional information regarding worldwide limited warranty and technical support is available at: www.hpe.com/services/support. Additional Hewlett Packard Enterprise support and service coverage for your product can be purchased locally. For information on availability of service upgrades and the cost for these service upgrades, refer to www.hpe.com/services/support.